DESCRIPTION
The BPS High Voltage Power Supply module is a small DC/DC converter which can be mounted and soldered on printed circuit boards (PCB). The output voltage is controllable with an analog control voltage. Therefore a potentiometer or fixed resistor can be used. The resonance converter technology and moulded metal box shielding guarantee lowest electromagnetic interference and low ripple and noise of the output voltage.
Customized versions can be produced on request.
Small High Voltage Print Module for PCB mounting up to 4 Watt.
• Versions from 300 V – 6 kV, 1/3/4 W available
• patented resonance converter technology
• controlled by analog set voltage
• analog monitor voltage
• wide supply range
• low ripple and noise, low EMI
• RoHS compliant
SPECIFICATIONS | |||
BPS 1 W | BPS 3 W | BPS 4 W | |
Polarity | factory fixed, positive or negative | ||
Ripple and noise [f >10 Hz] | typ. < 10 mVp-p max.25mV | typ. <20 mVp-p max.60mV | typ. < 5 mVp-p max.10mV |
Stability - [ΔVout / ΔVin] | < 5 • 10-4 • Vnom | < 2 • 10-4 • Vnom | |
Stability - [ΔVout / ΔRload] | < 2 • 10-3 • Vnom | < 5• 10-4 • Vnom | |
Temperatur coeffi cient | < 50 ppm / K | ||
Supply voltage | 4.5 - 5.5 V | 11.5 - 15.5 V | 11.4 – 12.6 V |
Supply current at Vout=0 at Vout=Vnom no load at Vout=Vnom with load | <10mA <50mA <400mA | <10mA <50mA <500mA | <10mA <40mA <500mA |
Set / monitor voltage | 0 - 2.5 V | 0 - 5 V | |
Protection | overload and short circuit protected | ||
HV connector | pin | ||
Case | metal box, moulded | ||
Dimensions - L/W/H | 40/40/18mm | 50(55)/40/17mm |